One day lamella drive-in packer
polymer, Ø 10 x 105 mm
Advantage/Notice
- All working steps can be carried out on one day
- Due to the integrated check valve no injection material may run back through the packer
- Tightness at low and high injection pressures (depending on component)
Material to be used
- 1C injection resin
- epoxy resin
- polyurethane
- quick-foaming polyurethane
- 2C injection resin
- 2C polyurethane
Technical data
| opening pressure | approx. 15 - 20 bar |
Application area
- crack injection
- Suitable for high-pressure injection
- subsequent wall-bottom sealing
- horizontal sealing
- masonry injection
Accessories
1 Variants
1 Variants
1 Variants
